Training wheels set to suit Crossfire CF50.
Installation in required to be done by a Technician.
- Failure to install correctly can result in brake lock up, chain misalignment and breakage. This can result in wheel lock up and loss of control.
- This riding aid should only be used for speeds up to 10km/h. Steering while balance aid is fitted to the bike is greatly impacted due to the limitation of ability to lean into corners.
- This device is an aid only and should not be used as an ongoing riding tool. Once balance is achieved the Training wheels should be removed.
- Small parts and packaging are not a toy and should not be given to kids to play with during or after assembly. There is a high suffocation risk!
Kit Contents
1 x Axle – 845mm
2 x Wheels – 2.50 x 4
1 x Box – CF50 Nuts, Bolts & Spacers
Set #1 (Training wheels Higher off ground) Please note size subject to change
4 x 45mm Bolts
3 x 30mm Spacers
1 x 20mm Spacer
Set #2 (Training wheels Closer to the ground) Please note size subject to change
4 x 65mm Bolts
3 x 45mm Spacers
1 x 35mm Spacer
Fitting
- Remove 2x 25mm rear bolts from the bash plate
- Keep 8mm spacer between sump guard and frame. (Rear Left bolt as per Image 3)
- Fit axle with 4 bolts with spacers. Short spacer is the rear left as per Image 3
- Fit wheels to the axles with valves facing outwards.
- Fit axle nuts. Thread lock applied
Tools
- Ruler/Calliper to measure bolts & spacers
- 6mm Hex bit or Allan key
- 19mm spanner/socket
Description
| Kit Contents: |
|---|
| 1 x Axle – 845mm |
| 2 x Wheels – 2.50 x 4 |
| 1 x Box – CF50 Nuts, Bolts & Spacers |
DISCLAIMER: Every effort has been made to ensure that the information on this site is correct and up to date, however, Crossfire Motorcycles does not provide any warranty as to the completeness or accuracy of the information and, subject to applicable laws, does not accept any liability for damages of any kind resulting from the access or use of this site and its contents. Crossfire Motorcycles reserves the right to discontinue or change any of the models, prices, colours, materials, equipment or other specifications referred to on this site at any time without notice. Some of the equipment shown or referred to in this site may only be available as an option at extra cost. Always consult an Authorised Crossfire Motorcycles Dealer for the latest information about a Crossfire Motorcycles product, and its availability, before placing an order. All prices specified on this site are in Australian dollars. All information on this site is protected by copyright and other intellectual property rights. No images, text or other content from this site may be distributed or reproduced without prior written approval from Crossfire Motorcycles.